How to Program Remotes FOR Keyless entry - Peterbilt 379 2004-2012
Posted: Tue Mar 05, 2024 7:44 pm
Gain access to behind the glove box.
Start by unscrewing the 4 Phillips screws holding the glove box in place.
On the left side behind the glove box will be 2 wires labeled " RKE "
Plug those wires into each other.
On each REMOTE you are programming press and hold bother UNLOCK & LOCK buttons untill you hear the door locks cycle.
Once finshed unplug those 2 " RKE " wires and put everything back to original place.
Start by unscrewing the 4 Phillips screws holding the glove box in place.
On the left side behind the glove box will be 2 wires labeled " RKE "
Plug those wires into each other.
On each REMOTE you are programming press and hold bother UNLOCK & LOCK buttons untill you hear the door locks cycle.
Once finshed unplug those 2 " RKE " wires and put everything back to original place.